Respiratory Accessories
CONFORMS TO EN149:2001+A1:2009. Features: Protection against solid (dust) particles and/or non-volatile liquid particles. Classification: FFP2 NR Applications: Suitable for use in concentrations of solid and non-volatile liquid particles with maximum concentration of 10x WEL (Workplace Exposure Limit). Always remember that the respiratory protection is only effective if it is correctly selected, fitted and worn throughout the time when the wearer is exposed to hazards. Technical Description: Valve: No Straps: Double elastic Mask Size: Medium Latex Free: Yes PVC Free: Yes Silicone Free: Yes
Added to Your Shopping Basket
Close this window once you have selected any accessories and want to proceed to your shopping basket
CONFORMS TO EN 14683:2019, CE CLASS 1. BFE: ≥ 98% Features: 150mm Elastic Ear Loops. 3 Ply with Filter Layer. The surgical face mask is single-use, disposable, provides non-sterile protection, and intended to be used to protect both the patient and the wearer from transfer of microorganism, body fluids and particulate material. These face masks are intended for use in infection control practices to reduce the potential exposure to blood and body fluids. Box of 50.
Added to Your Shopping Basket
Close this window once you have selected any accessories and want to proceed to your shopping basket
SPM001 Hard Carry Case offers protection for masks when not in use.
Added to Your Shopping Basket
Close this window once you have selected any accessories and want to proceed to your shopping basket
Size:
One Size
Colour:
Clear
Each
Resealable plastic container for Half Masks
Added to Your Shopping Basket
Close this window once you have selected any accessories and want to proceed to your shopping basket
- 3M fit test sweet solution - 55ml bottle - For use with 3M FT10 fit test kit
Added to Your Shopping Basket
Close this window once you have selected any accessories and want to proceed to your shopping basket
SR 297 ABEK1 protects against the same pollutant types as gas filter SR 315, and also against ammonia. Tested and approved according to EN 14387:2004.
Added to Your Shopping Basket
Close this window once you have selected any accessories and want to proceed to your shopping basket
The SR510 P3 filter is designed for use with the Sundstrom SR100 half mask respirator. The filter provides protection against all types of particulate pollutants (dust, fume, fog, spray, asbestos). Combination filters can beused if gases/vapours and particles occur in the same environment.
Added to Your Shopping Basket
Close this window once you have selected any accessories and want to proceed to your shopping basket
Pack of 5. Dust hoods to suit Respair Kite powered air system head top.
Added to Your Shopping Basket
Close this window once you have selected any accessories and want to proceed to your shopping basket
FFP3 particulate Press-to-check filters with hinge design to facilitate instant and accurate checking of the face fit, without effecting the seal of the mask to the face. Allow air to flow across the full area of the filter material, increasing efficiency and extending life. Large open area allows for lower breathing resistance and improved comfort. Features a built-in inhalation valve making the respirator easier to maintain. Low profile cover protects the enclosed pleated filter from moisture and foreign objects that could damage the pleats. Easily attaches to the Force 8 Respirator (available in 3 sizes see codes small = 494681000, medium = 454184000, Large = 652062000) ) with a secure fit when applied.
Added to Your Shopping Basket
Close this window once you have selected any accessories and want to proceed to your shopping basket
PressToCheck™ ABEK1 P3 Filters - Set of 2
Added to Your Shopping Basket
Close this window once you have selected any accessories and want to proceed to your shopping basket
Added to Your Shopping Basket
Close this window once you have selected any accessories and want to proceed to your shopping basket